PFAS Sampling Strategies
June 2021: From this 45-minute presentation plus interactive Q&A session, attendees will be brought fully up-to-date on the current PFAS landscape, how it is evolving, and how to develop highly effective sampling strategies for a variety of challenging environments. Learn also how to access Teledyne ISCO’s PFAS experts at any time to assist with sampler selection, installation, operation, and maintenance.
Watch the Webinar
What to Consider When Collecting Water Samples
May 2021: From this 45-minute presentation plus interactive Q&A session, attendees will gain greater insight into the factors affecting a variety of water-sampling projects and will be able to know with certainty that a particular installation is going to produce highly accurate and reliable samples. Learn as well how to access Teledyne ISCO’s water sampling experts at any time to assist with sampler selection, installation, operation, and maintenance.
Watch the Webinar
Cipher: Data Collection Anywhere, Anytime on Any Device
April 2021: From this 45-minute presentation plus interactive Q&A session, attendees will gain valuable insight into the extensive array of productivity tools including site profiles, drag-and-drop creation of graphs and scatter plots, customizable dashboards, maps view, site alarms, device voltages, rapid assessment of hydraulic conditions, and more.
Watch the Webinar
Ask ISCO: All About Portable Sampling
March 2021: From this 45-minute event, attendees will gain better insight into the most commonly encountered problems in portable sampling applications and how to handle them.
Watch the Webinar
Fundamentals of Open Channel Flow Rate Measurement
February 2021: In this introductory-level webinar, Darrell Kuta, Business Development Manager, discusses how to identify—and properly address—the most important factors affecting the design of your open-channel project.
Watch the Webinar
Tips and Tricks for Winter Sampling Webinar
January 2021: In this intermediate-to-advanced webinar Teledyne ISCO’s flow measurement experts discuss current best practices for obtaining accurate and reliable flow rate data in environments where traditional small-channel and/or closed-channel methods are not suitable.
Watch the Webinar
Tips and Tricks for Winter Sampling Webinar
January 2021: In this intermediate-to-advanced webinar Teledyne ISCO’s flow measurement experts discuss current best practices for obtaining accurate and reliable flow rate data in environments where traditional small-channel and/or closed-channel methods are not suitable.
Watch the Webinar
Measuring Flow Rates in Large Channels and Rivers
December 2020: In this intermediate-to-advanced webinar Teledyne ISCO’s flow measurement experts discuss current best practices for obtaining accurate and reliable flow rate data in environments where traditional small-channel and/or closed-channel methods are not suitable.
Watch the Webinar
Measuring Flow in Difficult Conditions
November 2020: In many cases where you thought it was difficult or impossible to measure flow, there actually might be a way. From small pipe to large pipe, slow or fast moving flow conditions, or even clear liquid, there are ways to measure that.
In this webinar, you will learn:
- How advanced laser technology is being used to read velocity in extreme flow applications, such as high and low velocity sites.
- How smart technology is used to provide maximum flexibility for selecting the appropriate flow sensor for the application.
- How to measure these flow conditions in hazardous locations.
Watch the Webinar
Confirming the Accuracy of Open Channel Flow Data
August 2020: In this webinar Teledyne ISCO’s factory experts explain how to read, analyze, and interpret flowmeter data, how to confirm accuracy, and how to use the advanced diagnostics capabilities of Flowlink software to tune your sensor installation for optimal performance.
Watch the Webinar
Advanced Technologies for Monitoring COVID-19 in Wastewater
October 2020: In this one-hour presentation and interactive Q&A session, subject matter experts from
GT Molecular and Teledyne ISCO discuss current best practices for the selection of wastewater monitoring sites, automatic sampling instruments, and advanced molecular detection of genetic material in the samples.
Watch the Webinar
Confirming the Accuracy of Open Channel Flow Data
August 2020: In this webinar Teledyne ISCO’s factory experts explain how to read, analyze, and interpret flowmeter data, how to confirm accuracy, and how to use the advanced diagnostics capabilities of Flowlink software to tune your sensor installation for optimal performance.
Watch the Webinar
Laser & Radar Sensors for Open Channel Measurement Applications
July 2020: From this webinar you will have a clear understanding of both technologies and the benefits of noncontact open channel flowmeters.
Watch the Webinar
Tracking COVID-19 in Wastewater
June 2020: From this webinar you will be able to identify the most cost-effective configurations for a variety of monitoring points including wastewater discharge, residential sewage, and water treatment facilities.
Watch the Webinar
Open Channel Sensor Diagnostics
May 2020: In this webinar, Rick Dey and Darrell Kuta, Teledyne ISCO Business Development Managers discuss what diagnostic tools are available with three common open channel sensors. They will show you how to read the story behind your sensors diagnostic data.
Watch the Webinar
Increasing Safety & Minimizing Exposure with Collection System Flow Measurement
May 2020: In this webinar, John Trofatter, Teledyne ISCO Director of Business Development, and Rick Dey, Teledyne ISCO Business Development Manager, address the unique hazards faced by wastewater operations and maintenance personnel and offers insights on how to remain safety focused and minimize potential exposure.
Watch the Webinar
Firmware Updates to Improve Your Performance
May 2020: In this webinar, designed for Teledyne ISCO customers, Darrell Kuta and Steve McManus show you how to keep your Teledyne ISCO firmware up-to-date and why that is important.
Watch the Webinar
Preparing for the Wet Weather Monitoring Season
April 2020: In this webinar, Product Support Specialists Dennis McGinnis and Steve McManus, along with Bob Glenn, Regional Manager – Water Platform discuss the steps cities take to prepare for wet weather flow monitoring and how a little extra effort now can help a monitoring program run smoothly.
Watch the Webinar
Troubleshooting and Optimizing ISCO Communication Devices
April 2020: Rich Skradski, Teledyne ISCO Regional Manager, and Greg Hazen, Product Support Specialist at Teledyne ISCO, will answer all your questions about modems, their challenges and how to troubleshoot any breakdown in communications.
Watch the Webinar
Open-Channel Flow Measurement 101
April 2020: In this webinar, Darrell Kuta, Flowmeter Business Development Manager at Teledyne ISCO, discusses the pros and cons of various open-channel flowmeter technologies and where they are most applicable.
Watch the Webinar
Collecting Samples: Placement, Setup, and Programming
March 2020: Product Support Specialist at Teledyne ISCO, Jeff VandeHoef will discuss what to look for in choosing a sampler site and ways to ensure the reliability of your samples.
Watch the Webinar
Measuring Flow in Hazardous Applications
February 2020: Business Development Manager at Teledyne ISCO, Rick Dey, will discuss some of the challenges inherent to hazardous locations, and ways to overcome them.
Watch the Webinar
Ask ISCO: Measuring Open Channel Flows
January 2020:
In this webinar, Teledyne ISCO Business Development Manager, Darrell Kuta, discusses common open channel flow challenges – and provides tips on how to overcome them.
Ask ISCO: About Vacuum Samplers
October 2019:
This webinar will be driven and directed by your questions. During this webinar, our industry experts will answer your submitted questions, and take questions live from the audience.
Hazardous Areas and the LaserFlow Ex
September 2019:
Darrell Kuta and Rick Dey will discuss the hazardous areas rating system and how the LaserFlow Ex will reduce exposure risk. You will also learn how to obtain accurate data with minimal maintenance while in compliance with hazardous rated areas.By the end of the webinar, we will know:
-
-
What is Class 1 Div. 1 and what areas in the collection system are rated
-
How to obtain accurate data with minimal maintenance while in compliance with hazardous rated areas
-
How smart technology can allow users to select appropriate sensor technology for the application
Speaker: Darrell Kuta and Rick Dey, Key Account Managers, Flowmeter Products
Measuring Flow in Difficult Conditions
June 2019:
In many cases where you thought it was difficult or impossible to measure flow, there actually might be a way. From small pipe to large pipe, slow or fast moving flow conditions, or even clear liquid, there are ways to measure that.
In this webinar, you will learn:
-
How advanced laser technology is being used to read velocity in extreme flow applications, such as high and low velocity sites.
-
How smart technology is used to provide maximum flexibility for selecting the appropriate flow sensor for the application.
-
How to measure these flow conditions in hazardous locations.
Speaker: Rick Dey, Key Account Manager, Flowmeter Products
Ask ISCO: Collection System Flow Monitoring
May 2019:
In our new webinar segment: Ask ISCO, we want to help you, our valued customers and viewers by answering your questions. We will be hosting a collection systems related Q&A session with our panel of product support specialists, as they hope to answer your questions.
In this webinar, you will learn:
-
Best practices for collection systems
-
Commonly used technologies
-
Installation Do's and Dont's
Speaker: Steve McManus, Product Support Specialist
Vacuum vs. Peristaltic Pump Samplers: Which is Right for You?
April 2019: We discuss how vacuum samplers and peristaltic samplers function, which applications they are ideal for, and how to decide which type is right for you. These samplers may use different technologies, but they both deliver high sample integrity and preform reliably.
Speaker: Jeff Vandehoef, Product Support Services Specialist
Watch the Webinar
Efficient Ways to Do Stormwater Sampling
March 2019: We discuss different hardware used for stormwater sampling. We will also touch on methods of communication and necessary power needs. Plus, we will explain ways of preserving your sample in the event of a storm.
Speaker: Dennis McGinnis, Product Support Specialist
Watch the Webinar
Things to Consider When Using Collection System Flow Meters
February 2019: In our Water & Wastewater webinar, we will be discussing flow monitoring, and why one would need to collect flow data. We will also discuss methods and best practices for collecting data. Plus, we will introduce you to different types of flowmeter technologies available for reading flow, and which would be best for your unique flow monitoring system.
Speaker: Dennis McGinnis, Product Support Specialist
Watch the Webinar
Download presentation slides
ASK ISCO: Portable Sampling
January 2019: In our Water & Wastewater webinar, we will discuss all things portable sampling, but with a twist! In our new webinar segment: Ask ISCO, we want to hear from you, our valued customers and viewers. We will host a product and application related Q&A session with our panel of product support specialists, as they hope to answer your questions about portable sampling.
Watch the Webinar