​​​​ ​Standard Features

  • UL approved for Class I, Div 2 environments
  • Operating Modes
    • Constant flow or pressure with up to four pumps
    • Continuous flow or pressure with dual pump
    • Flow or pressure programming with single pump
    • Dispense mode
  • External Interface
    • RS232/485 serial interface
    • Analog voltage inputs​
    • Digital inputs and outputs
    • ​Ethernet/USB

​Options and Accessories

  • Hastelloy 276 cylinder for added corrosion resistance

  • Temperature control jacket (i.e. cylinder cooling for filling with liquefied gas)

  • High-temperature pressure transducers (200 °C maximum)

  • High-precision pressure transducers (0.1% linear accuracy)

  • Drivers for LabVIEW - National Instruments

  • 4-20 mA input/output for flow rate and pressure control

  • ​Dual Pump Continuous Flow System - Air Valves​​​​

Content Query ‭[2]‬

​​
Capacity
​​102 mL
​​Flow Range
0.01µL – 60 mL/min*
​Flow Accuracy​
​± 0.3% of setpoint (Maximum 0.25 µL/min seal leakage)
Displacement Resolution
​3.86 nl/stop
Pressure Range
​​10 to 10,000 psi​ (0.7 to 689.5 bar)
Standard Pressure Accuracy
​0.5% FS, typical at constant temperature
​Optional Pressure Accuracy
​0.1% FS, typical at constant temperature​
Wetted Materials (Standard)
​Nitronic 50, Graphite filled PTFE, TFE, Hastelloy C-276, Inert Polymers, Gold, Titanium
​Plumbing Ports
​1/8" Valco
Operating Temperature
​5–40 °C Ambient
​Power Required
​100 Vac, 117 Vac, 234 Vac, 50/60 Hz (specify)
Dimensions (H x W x D)
​39.8 x 10.7 x 18.4 in (​101 x 27 x 47 cm)
Weight​​
​Pump unit—72.3 lb (32.8 kg)
Controller— 6.5 lb (3.0 kg)
​Standards Conformity
​UL 61010-1, ANSI/ISA 12.12.01-2012,
CSA C22.2 No. 1010 and No. 213-M1987
​​*Maximum flow rate is dependent upon operating pressure. (See manual for additional information.)​​

Chemical Compatibil​ity
​​Wetted materials have been tested for compatibility with the following fluids. 
​ethane
​ethylene
​propane
gasoline
​butane
​butadiene
​hexane
​methanol
​diesel fuel
​jet fuel
​ammonia
​heptane
​isopropanol
​acetone
​acetonitrile
​isobutylene
​benzene
​ethylbenzene
​propylene
​methane​

​Options & Accessories 

  • ​​Temperature control jacket (i.e. cylinder cooling for filling with liquefied gas)
  • ​Drivers for LabVIEW—National Instruments
  • ​4-20 mA inputs and outputs for flow rate and pressure control




Capacity
Flow Range*
(mL/min)
Flow Accuracy**
Pressure Range
(psi, bar)
Standard
Pressure Range
Standard
Plumbing Ports
Dimensions ​Continuous Flow Range ​(mL/min)
1000HLf
1015 mL
0.001–408
0.5% of Setpoint
10–2,000
0.7–137.9
0.5% FS
1/4” NPT
40.3x10.7x18.4 in
102x27x47 cm
0.01–265
500HLf
507 mL
0.001–204
0.5% of Setpoint
10–3750
0.7–258.6
0.5% FS
1/8” NPT 40.3x10.7x18.4 in
102x27x47 cm
0.001–132
260HLf
266 mL
0.001–107
0.5% of Setpoint
10–7,500
0.7–517
0.5% FS
1/8” Valco 39.8x10.7x18.4 in
101x27x47 cm
0.001–70
100HLf
102 mL
0.01 μL–60
0.3% of Setpoint
10–10,000
0.7–689.5
0.5% FS
1/8” Valco
39.8x10.7x18.4 in
101x27x47 cm
0.00001–16
​​* Maximum and minimum flows are dependent on optimizing your pump system. Consult a Teledyne ISCO Product Specialist to determine the best method for your application. For additional information, please consult the factory. Teledyne ISCO is continuously improving its products and reserves the right to change specifications without notice. All brand or product names mentioned herein are trademarks or registered trademarks of their respective holders.
** Flow rate accuracy are based on select conditions of fluid type, pressure and leakage rate.