2108 Analog Output Module

Easy interfacing from 2100 Series to SCADA/DCS


2108 Analog Output ModuleThe 2108 Output Module provides three independent current outputs for ISCO 2100 Series Area Velocity Flow modules; the 2150, 2151, and 2151P. The 2108 is DIN Rail mounted and uses a 7-26V DC power supply. 

It provides an easy interface from ISCO’s advanced 2100 Series Area Velocity Modules to data collection systems like SCADA/DCS or any other secondary instrument systems.

 Support

When you purchase instruments from Teledyne ISCO, you not only receive innovative, high quality products, you also receive excellent customer service and product support. Your initial purchase is only the beginning of Teledyne ISCO's ongoing commitment to their customers.

 Documents

  
  
2100 Series Flow Modules BrochureBrochure
Flow Monitoring Product Guide BrochureBrochure
2108 Analog Output Module DatasheetDatasheet
2108 Analog Output Module Safety and Certification SheetSafety and Certification Sheet
2108 Analog Output Module User ManualUser Manual

 Specifications

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​Isco 2108 Analog Module

Size (H x W x D): 4.76 x 6.73 x 2.17 in (12.1 x 17.1 x 5.5 cm)
Weight: 1.3 pounds (0.6 Kg)
Case Material: ABS
Enclosure Rating: NEMA 1, IP20
Number of Analog Output Channels: 3
Individual Channel Specifications
Output range: 4 - 20mA*
Maximum load resistance: 600 ohms
Isolation: Output galvanically isolated from DC power, from the network, and the other outputs.
Accuracy
Integral Nonlinearity: ±0.012% max
Offset ±0.05% max (0mA or 4mA)(Ta = 25°C) ​
Offset Drift: 50 ppm/°C max
Total Output Error: ±0.15% max (20mA or 24mA)(Ta = 25°C)
Total Output Error Drift: 50 ppm/°C max
PSRR: 10 µA/V max
Resolution: 16 bits, 244 nA, 0.0015% of 16mA span
Power: 7.0 to 26.0V DC, 300 mA typical at 12V DC, 280 mA standby

​For a full list of product specifications, see the datasheet.

Datasheet

 Overview

Standard Features

  • Three independent, isolated outputs per module.
  • Outputs are freely programmable for any parameter measured by ISCO’s Area Velocity flow module.
  • When more than one module is stacked, each output can be configured for any parameter for any module connected to the 2108.
  • The 2108 Module can be mounted as far as 3,000 ft from other modules (an ISCO Quick Disconnect is recommended to simplify the installation).
  • ISCO Flowlink 4.15 can interrogate any 2100 Series module through the 2108, eliminating the need for confined space entry.

Applications

  • Interfacing 2100 Series (2150 or 2151 flow modules) to SCADA systems and other analog data applications

Options and Accessories

  • DIN rail mount DC power supply. Input 115-230 VAC 50/60 Hz, Output 12 VDC, 1.5A.
  • 2100 Series Connect Cable, 50 ft. (15 m). One cable end has a single connector to plug into bottom of 2100 Module. Opposite end is unterminated with six wires stripped for connection to 2108 Analog Output module, Quick Disconnect box, or other device.