Chargers
Amphenol Connector Chargers
An Amphenol connector charger is a low-cost method for charging single Teledyne ISCO batteries. An impact-resistant case and solid-state construction make these chargers almost indestructible.
Input Voltage
| 120 VAC at 60 Hz*
| 120 VAC at 60 Hz 240 VAC at 50 Hz
| 120 VAC at 60 Hz 240 VAC at 50 Hz
|
Output Voltage
| 14.5 VDC at 400 mA*
| 13.7 VDC at 720 mA
| 13 VDC at 400 mA 14.9 VDC at 800 mA
|
Connector Type
| 2-pin circular Amphenol
| 2-pin circular Amphenol | 2-pin circular Amphenol |
Clamp-on 12V Chargers
This charger constantly monitors 12 volt/6 Amp charge status, shuts down when charging is complete, and gives notification via LED.
Input Voltage
| 120 VAC at 60 Hz**
|
Output Voltage
| 12 VDC at 6 A
|
Recommended Use
| For use with Teledyne ISCO Model 948 or other 12-Volt lead-acid batteries.
|
Solar-powered Chargers
Teledyne ISCO's solar-powered chargers deliver energy in long-term applications where AC power isn't available. Units are selected from a variety of solar panel options to best suit your specific application.
These chargers are recommended for remote or long-term installations at sites without available AC power.