Piston Seals

Piston Seals

Teledyne ISCO carries a wide variety of seals to fit almost any application; virgin Teflon for corrosive fluids, heavy-duty reinforced for slurries and viscous fluids, high temperature, and UHMW polyethylene. Your choice of seals can be ordered factory-installed in your pump system.

Standard Features

  • General use / CO2 - Black, Graphite filled PTFE
  • High temperature - Black, Graphite fiber PTFE
  • Low pressure - Black, Graphite filled PTFE, single point contact
  • Aqueous solutions - White, UHMW Polyethylene
  • Ammonia (NH3) / Nitric Acid - White, Virgin teflon

 LabVIEW Pump Tool Kit

​LabVIEW Pump Tool Kit

These kits consist of the drivers necessary to operate Teledyne ISCO Syringe Pumps with LabVIEW™ software for Windows. The LabVIEW program is not included, and must be purchased separately from National Instruments.

​LabVIEW Pump Tool Kit
​External Driver
​68-1247-134

 Service Kit

Service Kit

This kit consists of most common replacement parts and the tools required to install them.


Package contents

  • Cylinder cap seal
  • Shear key
  • Shear key installation tool
  • Replacement motor brush spring
  • Fuses
  • Label
  • Piston seals
  • Male tube connector
  • Pipe plug
  • Wrench Package:
    • Cylinder clamp
    • Socket screw key, (1/4 hex)
    • Open-end wrench, (3 1/4)
    • Open-end wrench, (3 3/4)
    • Piston wrench

​Service Kit
​1000D Kit
​68-1249-104
​500D Kit​68-1249-102
​260D Kit​68-1249-101
​100DX/DM Kit​68-1249-100
​65D Kit​68-1249-111