100HLf Hazardous Location Syringe Pump

100 mL capacity – up to 10,000 psi (690 bar)

100HLF Hazardous Location Syringe PumpTeledyne ISCO HLf-Series pumps give you the same accurate, predictable flow and pressure control as our standard D-Series, while conforming to safety standards for use in UL Class I, Division 2, Groups A B C & D, T4 environments. The hazardous location rating is achieved through internal design modifications including the use of brushless DC motors. This approach eliminates the need for purge boxes or other additional safety devices. 

Wetted materials are compat​ible with most aqueous and organic liquids, corrosive solutions, heated fluids, liquefied gases, viscous fluids, or slurries and pastes. If needed, optional materials such as Hastelloy C-276 are available on request. 

The HLf controller has a keypad and LCD, as well as built-in and optional interfaces for computer control and other devices. Programming is easy and flexible, with instant access to menu screens even when the pump is running. This allows you to change operating parameters on the fly.


Pumps Overview BrochureBrochure
100HLf Hazardous Location Syringe Pump DatasheetDatasheet
Flat Panel Controller for D-Series Tech BulletinLegacy Document
D-Series and HLf-Series Syringe Pump Controller VersionsTechnical Bulletin
D-Series Quad Dual Pump Systems for Continuous Flow and Independent Operation Tech BulletinTechnical Bulletin
Wash Glands for D-Series Tech BulletinTechnical Bulletin
D-Series Syringe Pumps User ManualUser Manual
HLf Series Syringe Pumps User ManualUser Manual


When you purchase instruments from Teledyne ISCO, you not only receive innovative, high quality products, you also receive excellent customer service and product support. Your initial purchase is only the beginning of Teledyne ISCO's ongoing commitment to their customers.


​​​​​​100HLf Hazardous Location Syringe Pump

​Capacity ​102.93 mL
​Flow Range
​0.00001 to 60 mL/min
Flow Accuracy
± 0.3% of setpoint (Maximum 0.25 µL/min seal leakage)
​Pressure Range
10 to 10,000 psi​ (0.7 to 689.5 bar)
​Plumbing Ports
​1/8" Valco
​Dimensions (H x W x D)
39.8 x 10.7 x 18.4 in (​101 x 27 x 47 cm)

​For a full list of product specifications, see the datasheet.



​Standard Features

  • UL approved for Class I, Div 2 environments
  • Operating Modes
    - Constant flow or pressure with up to four pumps
    - Continuous flow or pressure with dual pump
    - Flow or pressure programming with single pump
    - Dispense mode
  • External Interface
    - RS232/485 serial interface
    - Analog voltage inputs
    - Digital inputs and outputs
    - Ethernet/USB


  • Metering and dispensing in experiments and pilot plants where explosive conditions may occur
  • Precision fluid addition in research and manufacturing processes
  •  Chemical/reactant feed in chemical process development, catalyst evaluation, plastic formulation
  • Accurate metering of liquefied gases

Options and Accessories

  • Hastelloy 276 cylinder for added corrosion resistance
  • Temperature control jacket (i.e. cylinder cooling for filling with liquefied gas)
  • High-temperature pressure transducers (200 °C maximum)
  • High-precision pressure transducers (0.1% linear accuracy)
  • Drivers for LabVIEW - National Instruments
  • 4-20 mA input/output for flow rate and pressure control
  • Dual Pump Continuous Flow System - Air Valves​