1000HLf Hazardous Location Syringe Pump

1-liter capacity – up to 2,000 psi (138 bar)

100HLf Syringe Pump
The Teledyne ISCO HLf-Series pumps give you the same accurate, predictable flow and pressure control as our standard D-Series, while conforming to safety standards for use in UL Class I, Division 2, Groups A B C & D, T4 environments. The hazardous location rating is achieved through internal design modifications including the use of brushless DC motors. This approach eliminates the need for purge boxes or other additional safety devices. 

Wetted materials are compatible with most aqueous and organic liquids, corrosive solutions, heated fluids, liquefied gases, viscous fluids, or slurries and pastes. If needed, optional materials such as Hastelloy C-276 are available on request. 

The HLf controller has a keypad and LCD, as well as built-in and optional interfaces for computer control and other devices. Programming is easy and flexible, with instant access to menu screens even when the pump is running. This allows you to change operating parameters on the fly.




 Documents

  
  
Pumps Overview BrochureBrochure
1000HLf Hazardous Location Syringe Pump DatasheetDatasheet
Flat Panel Controller for D-Series Tech BulletinLegacy Document
D-Series and HLf-Series Syringe Pump Controller VersionsTechnical Bulletin
D-Series Quad Dual Pump Systems for Continuous Flow and Independent Operation Tech BulletinTechnical Bulletin
Wash Glands for D-Series Tech BulletinTechnical Bulletin
D-Series Syringe Pumps User ManualUser Manual
HLf Series Syringe Pumps User ManualUser Manual

 Support

When you purchase instruments from Teledyne ISCO, you not only receive innovative, high quality products, you also receive excellent customer service and product support. Your initial purchase is only the beginning of Teledyne ISCO's ongoing commitment to their customers.

 Overview

​Standard Features

  • UL approved for Class I, Div 2 environments
  • Operating Modes
    - Constant flow or pressure with up to four pumps
    - Continuous flow or pressure with dual pump
    - Flow or pressure programming with single pump
    - Dispense mode
  • External Interface
    - RS232/485 serial interface
    - Analog voltage inputs
    - Digital inputs and outputs
    - Ethernet/USB

Applications

  • Metering and dispensing in experiments and pilot plants where explosive conditions may occur
  • Precision fluid addition in research and manufacturing processes
  •  Chemical/reactant feed in chemical process development, catalyst evaluation, plastic formulation
  • Accurate metering of liquefied gases

Options and Accessories

  • Hastelloy 276 cylinder for added corrosion resistance
  • Temperature control jacket (i.e. cylinder cooling for filling with liquefied gas)
  • High-temperature pressure transducers (200 °C maximum)
  • High-precision pressure transducers (0.1% linear accuracy)
  • Drivers for LabVIEW - National Instruments
  • 4-20 mA input/output for flow rate and pressure control
  • Dual Pump Continuous Flow System - Air Valves

 Specifications

​​​​​​1000HLf Hazardous Location Syringe Pump

​Capacity ​1,015 mL
​Flow Range​​
​0.001 to 408 mL/min
​Flow Accuracy
± 0.5% of setpoint (Maximum 1.5 µL/min seal leakage)
Pressure Range
0.7 to 137.9 bar (10 to 2,000 psi)
Plumbing Ports
1/4" NPT
​Dimensions (H x W x D)
40.3 x 10.7 x 18.4 i​n (102 x 27 x 47 cm)

For a full list of product specifications, see the datasheet.

 

Datasheet