​1000D Syringe Pump

When you purchase instruments from Teledyne ISCO, you not only receive innovative, high quality products, you also receive excellent customer service and product support. Your initial purchase is only the beginning of Teledyne ISCO's ongoing commitment to their customers.

​1000D Pump Module
​Capacity	​1,015 mL
​Flow Range	​0.001 - 408 mL/min
​Flow Accuracy	​0.5% of setpoint
​Displacement Resolution	​25.4 nL
​Pressure Range	10 to 2,000 psi (​0.7 to 137.9 bar)
​Standard Pressure Accuracy	​0.5% Full Scale
​Optional Pressure Accuracy	​0.1% Full Scale
​Wetted Materials	​Nitronic 50, PTFE, Hastelloy, C-276
​Plumbing Ports	​1/4" NPT
​Operating Temperature	​5 to 40 °C Ambient
​Power Requirements	​100 VAC, 117 VAC, 234 VAC, 50/60 Hz
​Dimensions (H x W x D)	​40.3 x 10.7 x 18.4 inch (​102 x 27 x 47 cm)
​Weight	​Pump - 84.9 lb (38.5 kg) Controller - 6.5 lb (3.0 kg​)
​​For a full list of product specifications, see the datasheet. Datasheet

​​​​​​​

Standard Features

• 1000D's piston wash gland reduces effects of abrasive particles on seals and cylinder
  
• Integral button-style pressure transducer in cylinder cap assures excellent stability and repeatability.
  
• Rugged single-ratio drive train has auto-lubricating gears to assure long life and low maintenance.
  
• Each ISCO D-Series syringe pump is bench tested at the factory.
  
• Cylinder wash system protects the seals from deposits.
  
• Exclusive "Smart Key" controller. All ISCO D-series pumps use the same controller that can operate any four pump modules, either independently or together. Operating modes include:
• Single pump independent constant flow or pressure
  
• Single pump flow - or pressure - ramp programming
  
• Single pump dispensing
  
• Dual pump continuous constant flow or pressure
  
• Dual pump concentration gradients
• Four-pump configured systems
  
• RS-232/485 serial interface for computer control or monitoring of operating parameters.
  
• Redundant safety is designed in. All D-Series pumps have mechanical and electrical fail-safes, in addition to the factory default or user-set limits.
  
• Corrosion resistance. Nitronic 50 - the standard material for cylinders, pistons, and caps - is an austenitic stainless steel with outstanding strength and corrosion resistance.
  
• Standard seals are heavy-duty, graphite-impregnated Teflon, providing very long life under harsh operating conditions.

Applications

• Precision fluid addition in research and manufacturing processes
  
• Chemical/reactant feed in chemical process development, catalyst evaluation, plastic formulation
  
• Accurate metering of liquefied gases

Options and Accessories

• Hastelloy construction
  
• Temperature control jacket (cylinder cooling for filling with liquefied gas; thermal stabilization for ultra-low flow rates)
  
• High-temperature pressure transducers (for operation with pump cylinder heated up to 200 °C maximum)
  
• High-precision pressure transducers (0.1% linear accuracy)
  
• Drivers for LabVIEW graphical programming software from National Instruments
  
• Alternate seals optimized for special applications: virgin Teflon for corrosive fluids, heavy duty reinforced for slurries and viscous fluids, high temperature, low temperature, and UHMW polyethylene. Choice of seals can be ordered factory-installed.
  
• Slurry mixer kit