​1000D Syringe Pump

1-liter capacity for big jobs


The 1000D is the largest of the ISCO D-series pump modules, with 1-liter nominal cylinder capacity. It delivers precise, positive, pulseless flow over a range of 0.001 mL/minute to 400 mL/minute, at pressures from atmospheric to 2,000 psi (138 bar​).

Improved displacement resolution on this new model gives finer control over motor movement. Coupled to our patented servo circuit, this means the 1000D can deliver excellent flow accuracy without the need for external flow meters. You get low-flow precision at any pressure, plus the high speed smoothness and power of a DC motor.

The 1000D features 1/4" NPT fittings on inlet and outlet ports for less restriction in filling with viscous materials and for easy connection in pilot plant and other common applications. It also has a special piston wash gland that lets you rinse the cylinder wall behind the primary seal, reducing or eliminating corrosive or abrasive effects of the fluid being dispensed. The result is a longer lasting pump with lower maintenance costs.


 Documents

  
  
DoC 1000D HiAcc HV
Pumps Overview BrochureBrochure
Pumps Pharmaceutical BrochureBrochure
DoC 1000D DXCertification
DoC 1000D HastelloyCertification
1000D High Pressure Syringe Pump DatasheetDatasheet
Mixer Kit DatasheetDatasheet
Flat Panel Controller for D-Series Tech BulletinLegacy Document
D-Series and HL-Series Syringe Pump Controller Versions Tech BulletinTechnical Bulletin
D-Series Quad Dual Pump Systems for Continuous Flow and Independent Operation Tech BulletinTechnical Bulletin
Wash Glands for D-Series Tech BulletinTechnical Bulletin
D-Series Syringe Pumps User ManualUser Manual

 Support

When you purchase instruments from Teledyne ISCO, you not only receive innovative, high quality products, you also receive excellent customer service and product support. Your initial purchase is only the beginning of Teledyne ISCO's ongoing commitment to their customers.

 Specifications

​1000D Pump Module

​Capacity ​1,015 mL
​Flow Range
​0.001 - 408 mL/min
​Flow Accuracy
​0.5% of setpoint
​Displacement Resolution
​25.4 nL
​Pressure Range
10 to 2,000 psi (​0.7 to 137.9 bar)
​Standard Pressure Accuracy
​0.5% Full Scale
​Optional Pressure Accuracy
​0.1% Full Scale
​Wetted Materials
​Nitronic 50, PTFE, Hastelloy, C-276
​Plumbing Ports
​1/4" NPT
​Operating Temperature
​5 to 40 °C Ambient
​Power Requirements
​100 VAC, 117 VAC, 234 VAC, 50/60 Hz
​Dimensions (H x W x D)
40.3 x 10.7 x 18.4 inch (102 x 27 x 47 cm)
​Weight ​Pump - 84.9 lb (38.5 kg)
Controller - 6.5 lb (3.0 kg​)

​​For a full list of product specifications, see the datasheet.

Datasheet

​​​​​​​

 Overview


Standard Features

  • 1000D's piston wash gland reduces effects of abrasive particles on seals and cylinder
  • Integral button-style pressure transducer in cylinder cap assures excellent stability and repeatability.
  • Rugged single-ratio drive train has auto-lubricating gears to assure long life and low maintenance.
  • Each ISCO D-Series syringe pump is bench tested at the factory.
  • Cylinder wash system protects the seals from deposits.
  • Exclusive "Smart Key" controller. All ISCO D-series pumps use the same controller that can operate any four pump modules, either independently or together. Operating modes include:
    • Single pump independent constant flow or pressure
    • Single pump flow - or pressure - ramp programming
    • Single pump dispensing
    • Dual pump continuous constant flow or pressure
    • Dual pump concentration gradients
    • Four-pump configured systems
  • RS-232/485 serial interface for computer control or monitoring of operating parameters.
  • Redundant safety is designed in. All D-Series pumps have mechanical and electrical fail-safes, in addition to the factory default or user-set limits.
  • Corrosion resistance. Nitronic 50 - the standard material for cylinders, pistons, and caps - is an austenitic stainless steel with outstanding strength and corrosion resistance.
  • Standard seals are heavy-duty, graphite-impregnated Teflon, providing very long life under harsh operating conditions.

Applications

  • Precision fluid addition in research and manufacturing processes
  • Chemical/reactant feed in chemical process development, catalyst evaluation, plastic formulation
  • Accurate metering of liquefied gases

Options and Accessories

  • Hastelloy construction
  • Temperature control jacket (cylinder cooling for filling with liquefied gas; thermal stabilization for ultra-low flow rates)
  • High-temperature pressure transducers (for operation with pump cylinder heated up to 200 °C maximum)
  • High-precision pressure transducers (0.1% linear accuracy)
  • Drivers for LabVIEW graphical programming software from National Instruments
  • Alternate seals optimized for special applications: virgin Teflon for corrosive fluids, heavy duty reinforced for slurries and viscous fluids, high temperature, low temperature, and UHMW polyethylene. Choice of seals can be ordered factory-installed.
  • Slurry mixer kit